A hand grinder with a 38 mm five-pin conical burr in 420 stainless, set in an aluminium body with an external adjustment ring. The pins are what separate it from a cheap grinder: five cutting edges instead of three break the bean more evenly, so the grind comes out with fewer fines.
Features
- 38 mm conical burr in 420 stainless steel with five cutting pins
- External numbered adjustment ring, so the setting is visible and repeatable
- Knurled aluminium alloy body that does not slip in a wet hand
- Folding crank arm with a turned wooden knob
- Grinds from espresso fine through to French press coarse
- 650 g and no power needed, so it travels
Technical data
| Type | Manual conical burr grinder |
|---|---|
| Burr | 38 mm conical, 5 pin |
| Burr material | 420 stainless steel |
| Body | Knurled aluminium alloy |
| Adjustment | External numbered ring, stepped |
| Range | Espresso fine to French press coarse |
| Crank | Folding arm with wooden knob |
| Capacity | approx. 20 g (0.7 oz) per grind |
| Height | approx. 15 cm (5.9 in) |
| Body diameter | approx. 5 cm (2.0 in) |
| Width with handle | approx. 13 cm (5.1 in) |
| Weight | 650 g (1.4 lb) |
| Power | None, hand operated |
Care and cleaning
- Brush the burr chamber out rather than washing it. Water in a burr chamber causes rust.
- Not suitable for the dishwasher and not immersible.
- Back the adjustment off to the coarsest setting before storing to take load off the spring.
What’s in the box
- 1 x manual burr grinder
- 1 x folding crank arm
- 1 x cleaning brush
Reviews
There are no reviews yet.